Pedders Heavy Duty towing and Load carrying Kit. Dodge Ram 1500. 2009-2018 803522

Pedders Heavy Duty Towing and Load Carrying Kit. Dodge Ram 2009-2018

Improved load carrying and towing for your Dodge Ram.

Are you finding that your Dodge Ram suspension is struggling with the demands you put on it?

Then Pedders Suspension have the solution for you.

This kit is our “constant load” kit designed for those who regularly run laden. It features an upgraded rear spring, and shocks designed to match. We recommend a minimum load of circa 350kg with this kit. Operation in the unladen state may result in a harsher ride than is desirable.

Results vary dependant on weight distribution, but as a simple guide, assuming your Ram is well loaded, this kit will RAISE the rear from where it currently sits by circa 30-40 mm. Please check that this will not lift it too much prior to ordering

These components replace the original items. No other modifications to the vehicle are necessary.

If your loads vary between completely empty and fully loaded, please consider using one of our airbag kits, Pedders part number 495110HD or 495119HD for raised vehicles. If you have a lot of weight biased towards the front we can assist with this also. Still not sure this is the correct kit for you? Have further questions? Then please do get in touch with one of our team here at Pedders who will be able to assist.

Key features

• Heavy Duty Kit
• Improved load carrying and towing ability
• Premium grade springs
• Uprated shocks for improved stability and load control
• All backed by our 2 year / 25,000 mile warranty

Vehicle Height Information

Rear: Approx. 30mm higher with 350kg load
Notes: Heights should be measured as shown in the secondary picture.

Contents of Kit 803522 (Pedders Part Numbers)

151369 x 2 - Pedders Uprated Foam Cell Shocks
290213 x 2 Pedders Uprated Coil springs.