Pedders Heavy Duty Load Carrying and Towing Suspension Kit. With Assembled struts. Toyota Hilux Mk6 and 7 803158

Pedders Heavy Duty Load Carrying and Towing Kit. Toyota Hilux Mk6 & 7

Improved load carrying and towing ability and ground clearance.

Do you use your Hilux for load carrying and/or towing?

Then Pedders Suspension have the solution for you.

This kit features our excellent Pedders TrakRyder Foam Cell Ezifit front struts, Trakryder Foam Cel rear shocks, new rear leaf springs as well as the necessary bushes and U bolts to install them.

Our heavy duty kit and is designed primarily to raise the vehicle and improve its load carrying and towing ability. If your Hilux currently sits low at the rear when towing or load carrying, then this kit offer a significant improvement compared to the standard vehicle.

This kit improves the load carrying ability compared to the standard Ford Ranger rear spring. It does, however, require a constant load of 300kg to retain good ride comfort. Dont forget to include your canopy and tow bar, for example, as part of the 300kg constant load.

This kit will raise the vehicle by approx. 40mm (see actual dimensions below) allowing better ground clearance and improved looks as well as improved load handling capability. Can be used to accommodate larger tyres. The dimensions quoted assume a standard vehicle. If you have additional equipment on board at the front such as a winch or bull bar, this will affect the final installed height. If this is the case, please contact us as it may be necessary to supply different springs for your application.

For those using the vehicle more heavily laden, and with permanent loads over 600kg, please consider our Heavy Duty Kit, 803687.

These components replace the original items. No other modifications to the vehicle are necessary. After fitting we strongly recommend a wheel alignment is carried out for optimum performance of your vehicle.

Still not sure this is the correct kit for you? Have further questions? Then please do get in touch with one of our team here at Pedders who will be able to assist you.

Key features

• 1.75 Inch Lift Kit
• Improved load carrying and towing
• Increased Off-Road Ground Clearance
• Sintered Iron Piston Shocks with Large 40mm Bore
• Premium Grade Steel Coils
• All backed by our 2 year / 40,000km warranty

Vehicle Height Information

Front: 760mm with 16 inch wheels
Rear: Approx. 40mm higher than standard dependant on exact load.
Notes: Heights should be measured as shown in the secondary picture.

Contents of Kit 803158 (Pedders Part Numbers)

807305 x 2 - Pedders Foam Cell Ezifit Strut
6280 x 2 - Pedders Heavy Duty Leaf Spring
151226 x 2 - Pedders Foam Cell Shock, Rear
EP8338 x 1 - Pedders Urethane Leading Eye Bush
EP8339 x 1 - Pedders Urethane Lower Shackle Bushes
434008 x 4 - Pedders U bolt