Shopping Cart

Pedders Heavy Duty Load Carrying and Towing Suspension Kit. Nissan Navara D21/22 Upto 1997 4WD ONLY 803187

In stock
Only 1 left
SKU
803187
£1,040.77 £867.31

Pedders Heavy Duty Load Carrying and Towing Suspension Kit. Nissan Navara D21/22 Upto 1997 4WD ONLY

Improved load carrying and towing ability and ground clearance.
Do you use your Navara for load carrying and/or towing?
Then Pedders Suspension have the solution for you.
This kit features our excellent Pedders TrakRyder shocks, front coil springs, new rear leaf springs as well as the necessary bushes and U bolts to install them.
This kit is our heavy duty kit and is designed primarily to raise the vehicle and improve its load carrying and towing ability. If your Navara currently sits low at the rear when towing or load carrying, then this kit offer a significant improvement compared to the standard vehicle.
This kit improves the load carrying ability compared to the standard Navara rear spring. Pedders recommend that the vehicle has a minimum of 300kg load at all times. Operation of the vehicle completely unladen will result in a less than desirable level of ride comfort.
This kit will raise the vehicle by approx. 30mm (see actual dimensions below) allowing better ground clearance and improved looks. Can be used to accommodate larger tyres. The dimensions quoted assume a standard vehicle. If you have additional equipment on board at the front such as a winch or bull bar, this will affect the final installed height. If this is the case, please contact us as it may be necessary to supply different springs for your application.
These components replace the original items. No other modifications to the vehicle are necessary. After fitting we strongly recommend a wheel alignment is carried out for optimum performance of your vehicle.
Still not sure this is the correct kit for you? Have further questions? Then please do get in touch with one of our team here at Pedders who will be able to assist you.

Key features

  • 1.5 Inch Lift Kit
  • Improved load carrying and towing
  • Increased Off-Road Ground Clearance
  • Sintered Iron Piston Shocks with Large 35mm Bore
  • Premium Grade Steel Coils
  • All backed by our 2 year / 40,000km warranty

Vehicle Height Information

Front: Adjustable
Rear: 790mm with 16 inch wheels.
Notes: Heights should be measured as shown in the secondary picture.

Contents of Kit 803187 (Pedders Part Numbers)

9031 x 2 - Pedders Trakryder Shock
4713 x 1 Pedders Front Torsion Bar Pair
6267 x 2 - Pedders Heavy Duty Rear Spring
9130 x 2 - Pedders Trakryder Rear Shock
EP1163 x 1 - Pedders Urethane Leading Eye Bushes
EP203 x 1- Pedders Urethane Lower Shackle Bushes
EP995 x 1- Pedders Urethane Lower Shackle Bushes
4382 x 4 - Pedders U bolt

Make Model Year
No information