Pedders 1.75 Inch Suspension Lift Kit. With Heavy Duty Front. For Use With Winch, Bull bar OR aftermarket Front Bumper ONLY. Toyota Landcruiser 90 Series / Colorado / Prado

Are you looking to raise your Toyota Landcruiser?
Then Pedders Suspension have the solution for you. The Pedders Suspension Toyota Landcruiser Lift Kit.

This is our lift kit, similar to our kit 803128 but with heavy duty front springs, and features our excellent Pedders Shocks at the front and rear. Also included are 4 new coil springs

This kit is for vehicles with additional front loads such as winch, bulbar and aftermarket steel bumpers etc. This kit will raise the vehicle by approx 35 - 40mm (see actual dimensions below) depending on loads, and allows better ground clearance and improved looks. Can be used to accommodate larger tyres

The dimensions quoted assume a significant load over the front axle. Insufficent load will result in excessive height which can impact comfort and ability to achieve satisfactory alignment settings. If you are unsure, please contact us as it may be necessary to supply different springs for your application.

These components replace the original items. No other modifications to the vehicle are necessary. After fitting we strongly recommend a wheel alignment is carried out for optimum performance of your vehicle.

Still not sure this is the correct kit for you? Have further questions? Then please do get in touch with one of our team here at Pedders who will be able to assist you.

Key features

• 1.75 Inch Lift Kit
• Increased Off-Road Ground Clearance
• Premium Grade Steel Coils
• All backed by our 2 year / 40,000km warranty

Vehicle Height Information

Front: 790mm with 16 inch wheels
Rear: 800mm with 16 inch wheels
Notes: Heights should be measured as shown in the secondary picture.

Contents of Kit 803126 (Pedders Part Numbers)

9225 x 2 - Pedders Front Shock (
7768 x 2 - Pedders Front Spring
7769 x 2 - Pedders Heavy Duty Rear Spring
9132 x 2 - Pedders Trakryder Rear Shock