Pedders 2 Inch Heavy Duty Load Carrying and Towing Kit

This heavy duty kit is designed for Volkswagen Amarok 3.0 V6 models from 2023 onwards used for load carrying and towing. It enhances ground clearance and load capacity while maintaining suitable ride comfort with a constant load. The front coil springs are reinforced to accommodate the additional weight of a winch or aftermarket front bumper, ensuring balanced vehicle stance and performance.

Key Features

• 2 Inch Lift Kit
• Improved load carrying and towing ability
• Reinforced front coil springs suitable for winch or aftermarket bumper installation
• Increased off-road ground clearance
• Sintered iron piston shocks with large 40mm bore
• Premium grade steel coil springs
• Includes front coil springs and new rear leaf springs with bushes and U bolts
• 2 year / 40,000km warranty

Product Overview

This kit significantly raises the Amarok, improving rear stance by approximately 50mm over standard height for better ground clearance and fitment of larger tyres. It is suited for vehicles regularly carrying a constant load of around 300kg including accessories such as canopies, tow bars, or a front winch setup. The reinforced front springs maintain ride height and handling even when additional front-end accessories are installed.

The kit improves load carrying and towing without requiring additional vehicle modifications beyond replacing the springs and shocks. For heavier duty use, Pedders recommends their Extra Heavy Duty Kit.

The kit's components are designed to replace standard suspension items to restore and optimise vehicle stance and ride under load conditions. It suits daily driving and off-road applications where enhanced load capacity is important.

Technology & Materials

This kit features sintered iron piston shocks with a large 40mm bore for durable damping performance. Premium grade steel coil springs are used in the front, specifically reinforced to handle extra weight from a winch or aftermarket front bumper, along with new rear leaf springs designed to handle heavier loads and improve ride height and stability.

Installation & Compatibility

The kit includes all necessary hardware such as bushes and U bolts for installation. It is a direct replacement for original components. A professional wheel alignment is strongly recommended after fitting to optimise vehicle performance and handling.

This kit is comfort-focused when carrying an approximate constant load of 300kg and designed primarily for load carrying and towing improvements.

Technical Specification

• Front height: 615mm hub centre to wheelarch
• Rear height: approximately 50mm higher than standard
• Shock bore: 40mm
• Includes front coil springs (reinforced), rear leaf springs, bushes and U bolts
• Fitment: Volkswagen Amarok 3.0 V6 2023 on

Vehicle ride height may vary depending on additional equipment such as bull bars or winches. Alternative spring rates may be needed if extra front equipment is fitted.

Why Choose This Kit

• Matched coil and leaf springs with heavy duty shocks for load and towing demands
• Reinforced front springs ideal for vehicles equipped with winches or aftermarket bumpers
• Proven design tailored to Volkswagen Amarok 3.0 V6 2023 onwards
• Includes all necessary hardware for straightforward installation
• Backed by a 2 year / 40,000km warranty