Pedders 1.75 Inch Suspension Lift Kit Toyota Hilux | Improved Ground Clearance & Off-Road Capability
Pedders 1.75 Inch Suspension Lift Kit Toyota Hilux
This entry-level suspension lift kit raises the Toyota Hilux by approximately 40mm (1.75 inch), enhancing ground clearance, vehicle stance, and off-road performance while allowing room for larger tyres. It replaces original factory components with a complete direct bolt-on setup requiring no additional modifications.
This kit is suited for standard load carrying; for vehicles regularly carrying heavy loads or towing, Pedders heavy-duty options are recommended.
Key Features
- 1.75 Inch (approx. 40mm) lift kit for increased ground clearance
- Sintered iron piston shocks with large 35mm bore
- Premium grade steel coil springs
- Direct bolt-in replacement with supplied hardware
Installation & Technical Specs
- Professional wheel alignment strongly recommended after installation
- Front vehicle height: 765mm with 16 inch wheels
- Rear height: approximately 40mm higher than standard
- Includes front coil springs, rear leaf springs, TrakRyder shocks, bushes, and U-bolts
- Warranty: 2 year / 40,000 km / 25,000 mile warranty
Anti-Roll Bar Fitment & Clearance: When installing foam cell or adjustable foam cell struts, the anti-roll bar fouls against the shock absorber spring seat due to the lower seat position compared to OE struts. To resolve this clearance issue, Anti-Roll Bar Relocation Kit (Part No. 5076, included in the kit) must be installed to shift the bar forward; please note that on some vehicles, moving the bar forward may bring it into slight contact with the removable chassis stiffener, which can be easily resolved by grinding approximately 3 mm off the edge of the stiffener.
Contents of Kit 803083 (Pedders Part Numbers):